Next Level Racing F-GT Manual De Instrucciones página 8

F-GT SIMULATOR COCKPIT
Step 10: GT ASSEMBLY
WARNING
DO NOT OVER TIGHTEN 2 X 60MM BOLTS FOR PEDAL PLATE
OR YOU CAN DAMAGE YOUR FRAME
WHEEL PLATE
3. 2 X 50MM BOLTS.
Repeat both sides.
5. Attach PEDAL PLATE to
frame using 1 X 16MM BOLT.
2. Insert Wheel Support Bars.
Repeat both sides.
Use 2 X 16MM BOLTS on each side
to adjust height.
PEDAL PLATE
1.
4. Attach GT SEAT
2 X 60MM BOLTS.
SUPPORTS to last holes
Repeat both sides.
using 2 X 60MM BOLTS.
*Once you are happy with the position
Repeat both sides.
tighten as much as possible to ensure wheel
PEDAL ANGLE BAR
support is strong and rigid
For assistance please contact: support@nextlevelracing.com
www.nextlevelracing.com