Unpacking And Assembly - Laerdal Resusci Junior Instrucciones De Utilizacion

EN ResJun:Layout 1

Unpacking and assembly

If the manikin is stored in the carrying case it is
necessary to assemble the manikin before use.
Place the torso on a firm surface.
Pull out the hip bolt.
Push the two legs into their seats.
Fasten legs to the body by inserting the hip bolt
through the opening in the body shell, through
the holes in the thighs and out through body shell
opening on the opposite side.
Press the bolt into its seat to avoid loosening it by
accident.
Put the shorts and jacket on the manikin.
Training mat
All versions of Resusci Junior contain a training
mat.This has two purposes:
• Comfort and convenience for students and
instructors when practicing BLS skills on the
Resusci Junior.
• Movement of the assembled Resusci Junior
around the classroom / training venue
To use in water
If the manikin is to be used for training in water,
see the section on "Water rescue" page 6.
Manikin with SkillGuide
If you have purchased the Resusci Junior with
SkillGuide:
• Remove the SkillGuide protective cover.
• Plug the SkillGuide cable into the connector
on the right side of the manikin.
• Remove the paper tab coming from the
battery compartment on the back of the
SkillGuide.
• Press the "ON" button to begin practice.
• When transporting the manikin using the
training mat it is recommended that the
SkillGuide be unplugged and moved
separately.
14.12.2007 12:39 Side 3
Repacking after use
If the manikin has been used in water, see
instructions in the section on "Water rescue"
page 6.
To store in hard case
If the SkillGuide is attached, unplug the cable and
store the SkillGuide in the soft pouch.
Take off the shorts. Detach the legs from the
body in the following way:
Extract the hip bolt as follows:
• Exert pressure on the protruding end of the
bolt. Continue to push to get the hip bolt
further out
• Grasp and pull out the hip bolt
When the legs have been removed, press the
bolt into its seat to avoid loosening it by accident.
Put the torso in the case, face up. Place a leg on
each side of the manikin.
Remove dirt from the training mat by wiping it
with a damp cloth. Put the training mat into the
plastic bag provided, and place on top of the
manikin.This will prevent dirt from the training
mat getting on the manikin.
3