Kenmore 119.16658011 Manual De Uso Y Cuidado página 16

1_ Install Side Burner Valve
[] Locate the side burner ignition wire underneath the main burner control panel. It will be labeled.
Feed side burner valve and igniter wire through hole in left side of cabinet.
[] Open side burner lid and cut tie wrap securing grate to pan. On underside of pan, remove the 2
screws holding the side burner in place. See Inset 1.
[] Secure the side burner valve stem to the Side Burner Lower Control Panel using 2 Phillips Head
Bolts(IVl4x8mm). See Inset 2.
[] Center the side burner valve into the side burner tube. See Inset 3. Reattach side burner to pan
with 2 previously removed screws.
[] Use 1 Phillips Head Bolt (M4x8mm) to attach the Side Burner Lower Control Panel to the firebox.
See Inset 4.
Inset 1 Inset 2
Phillips Head Bolt M4x8mm
Qty: 3
Inset 3
Inset 4
1_ Attach Side Burner Control Knob and Side Burner Ignition Wire
[] Attach the side burner ignition wire over the side burner connector pin. See Inset 1.
[] Push the Side Burner Control Knob onto the valve stem. See Insert 2
Inset 1 Inset 2
16