3.7 Electromagnetic Compatibility (EMC)
WARNING:
The Prexiso XL2 conforms to the most stringent require-
ments of the relevant standards and regulations.
Yet, the possibility of it causing interference in other
devices cannot be totally excluded.
CAUTION:
Never attempt to repair the product yourself. In case of
damage, contact the local dealership.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interfer-
ence to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
783114 en
correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV techni-
cian for help
WARNING:
Changes or modifications not expressly approved by
Prexiso AG for compliance could void the user's authority
to operate the equipment.
3.8 Laser classification
The Prexiso XL2 produces visible laser beams, which are
emitted from the instrument:
It is a Class 2 laser product in accordance with:
•
IEC60825-1 : 2007 "Radiation safety of laser products"
Laser Class 2 products:
Do not stare into the laser beam or direct it towards other
people unnecessarily. Eye protection is normally afforded
by aversion responses including the blink reflex.
WARNING:
Looking directly into the beam with optical aids
(e.g. binoculars, telescopes) can be hazardous.
11