Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
BOX CONTENTS
DJ|iO
USB Cable
CD
FEATURES
1.
USB PORT – Please use the supplied
USB2.0 cable to connect this port to an
available USB2.0 port on your computer.
When plugged into your computer, the unit
will draw power from the USB connection.
Please note: The DJ|iO requires a USB2.0
connection in order to function fully and
properly. If using a USB1.1 connection, only
OUTPUT 1 will work. To take advantage of
both outputs, please make sure that you are
connecting to a USB2.0 compatible port on
your computer.
2.
DC IN – If your computer does not supply
enough power through the USB bus, you
may wish to power the unit externally by
connecting an optional 6V/1A adapter to this input and plugging the adapter into a power supply.
3.
OUTPUT 1 – This stereo RCA connection will output the Master Mix from your computer. Please use a
stereo RCA cable to connect this output to a powered speaker or amplifier system.
4.
OUTPUT 2 – This stereo RCA connection will output the Cue Mix from your computer for monitoring
purposes. Please note that the Cue Mix is also output through the Headphone Output on the front panel.
5.
POWER INDICATOR – This LED will light up to let you know that the DJ|iO is on.
6.
MIC THROUGH INPUT – This is a ¼" microphone input. The signal from this input will be sent directly to
the Output 1 (Master Mix) RCA output.
7.
MIC VOL – This knob controls the microphone level being sent to Output 1 (Master Mix).
8.
HEADPHONES – This stereo ¼" output will output the signal being routed to Output 2 (Cue Mix). To take
full advantage of cueing and monitoring through this output, please make sure that you have routed the
Cue Mix in your software to Output 2 of the DJ|iO.
Quickstart Guide
Safety Instructions & Warranty Information booklet
7
5
3
3
4
2
6
8
4
2
1
Publicidad
Tabla de contenido
