Numark DJ iO Guia De Inicio Rapido página 5

SOFTWARE AUDIO SETUP
CUE
If you are using the DJ|iO with Numark's Cue or
Cue Lite DJ software applications, please see the
example and instructions below for information on
routing your audio outputs to take full advantage of
cueing and monitoring.
In Cue, click on the Config button in the top right
corner of the screen to access Cue Lite's
configuration settings.
shown on the right.
1. Select NONE from the Inputs pull-down
menu.
2. Select ASIO driver from the Sound card(s)
pull-down menu.
3. Select Numark USB Audio Device under
the ASIO driver pull-down menu.
4. Select Headphones from the Outputs pull-
down menu.
5. Lastly, you can choose which outputs you
would like to use for your Master and
Headphones channels from the pull-down
menu on the bottom. Since the Headphone output on the DJ|iO is tied to the Output 2 stereo RCA pair, we
recommend leaving this option as it is (Master: Chan 1&2 / Headphones: Chan 3&4).
6. Click OK to exit the configuration settings.
Additional Information: You may also wish to send each virtual "deck" independently to each output pair on the
DJ|iO for use with an external mixer. To do so, please select External Mixer from the Outputs pull-down menu.
You will then be able to decide which deck is being sent to which output pair.
You will see the window
5