General Information; Required Accessories - STAMOS MIG Serie Manual De Instrucciones

EN
Figure S-MIG350C
42
EN
GAS-SHIELDED WELDING

General information

The main area of use is in workshops, universally as well as for thinner metal sheets
and thicker materials. The more welding levels the device offers, the more effective
it is with sheet metal.

Required accessories

Mixed-gas CO2/argon, welding wire, welding shield, pressure regulator. With appro-
priate gas and wire the process is also suitable for aluminium and stainless steel.
(Pure argon/VA wire/aluminium wire), potentiometer.
Welding tips
Disturbance Cause & solution
Wrong workpiece • Poor weld preparation
• Align the edges and
attach for welding (pin)
Weld overthickness • Open circuit voltage is
too low
• Welding speed is too
low
• Incorrect angle of the
welding torch
• Too thick wire
Too little metal appli- • Welding speed is too
cation high
• Voltage is too low for
the welding speed used
43
Example