Important Safety Information; Safety Warnings And Precautions; Work Area Precautions; Electrical Safety - STAMOS S-PLASMA 55H Manual De Instrucciones

USER MANUAL
S-PLASMA 55H | S-PLASMA 85H
S-PLASMA 125H | S-PLASMA 85CNC
S-PLASMA 125CNC
66
e xpo n do . de
Rev. 02.03.2017

IMPORTANT SAFETY INFORMATION

Keep this manual for the safety warnings and precautions, assembly, operating, inspec-
tion, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
In this manual, on the labeling, and all other information provided with this product: This
is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION: used with the safety alert symbol, indicates a hazardous situation which,
if not avoided, could result in minor or moderate injury.
NOTICE: is used to address practices not related to personal injury.

SAFETY WARNINGS AND PRECAUTIONS

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!

Work Area Precautions

• Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distrac-
tions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.

Electrical Safety

• Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt whether the outlet is properly grounded. If the tool
should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
Rev. 02.03.2017
EN
67