Preparation; Wiring Diagrams - HomeNetWerks 7130-08-BT Manual Del Usario

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Tools Required for Assembly (not included): Hammer, Drill Bits, Flathead Screwdriver, Wire Nuts, Nails,
Duct Tape, Phillips Screwdriver, Utility Knife
Helpful Tools (not included): Electric Drill, Wood Screws
WARNING: Turn off electricity at breaker box before beginning installation.
Carefully remove unit from carton.
Check area above installation location to be sure that wiring can run to the planned location and that
duct work can be run and the area is sufficient for proper ventilation.
Inspect duct work and wiring before proceeding with installation.
Before installation, provide inspection and future maintenance access at a location that will not interfere
with installation work.
You may need the help of a second person to install this fan; one person on the attic side and one on
the room side.
Note: Installations may vary depending on how the previous bath fan was installed. Supplies necessary
for the installation of your bath fan are not all included; however, most are available at your local
home improvement or hardware store.
DIMENSION REQUIREMENTS
Ceiling
Opening (L) Opening (W)
7-1/2 in.

WIRING DIAGRAMS

WIRING FOR 2 SWITCH OPERATION
Bluetooth speaker
LED
Controller
Automatic terminal
switch
Capacitor
for long
Motor
life of
motor
Fan Housing
www.homewerksww.com
Ceiling Ceiling
Opening (H)
7-1/4 in. 7-1/4 in.
to 120V/60Hz
Light kit connection
Speaker/LED Switch (Black)
Light kit connection
Speaker/LED Neutral (White)
Fan connection
Fan Switch (Black)
Fan connection
Fan Neutral (White)
Grounding connection
Green Wires
Junction Box
WIRING FOR 1 SWITCH OPERATION
Switch
Neutral
Automatic terminal
Switch
switch
Neutral
Capacitor
for long Motor
life of
Ground
motor
5
to 120V/60Hz
Bluetooth speaker
LED
Controller
Fan Housing Junction Box
Speaker/LED
switch to fan
switch
Neutral to
neutral
Fan connection
Fan Switch (Black)
Switch
Fan connection
Fan Neutral (White)
Neutral
Grounding connection
Green Wires
Ground