Disconnecting Your Portable Hard Drive; For Windows Users; For Mac Os Users - Verbatim InSight Guia Del Usuario

up wizard to install the software.

Disconnecting Your Portable Hard Drive

Your Verbatim portable hard drive is hot-pluggable; it can be
connected and disconnected without restarting your computer. To
disconnect your Verbatim hard drive at any time, simply perform the
following steps. You can also disconnect your hard drive at any time
while your computer is powered off.
Note: Please be careful to follow the correct procedure when
disconnecting your unit. Your InSight display will update its disk
information during the disconnection procedure. Simply
unplugging the unit without first following the instructions below
will cause the display to show incorrect information and may
result in damage to your unit and/or loss of data.

For Windows Users:

1. If you have files located on your drive open in any applications,
close them.
2. Click the Unplug or Eject Hardware button in the System Tray.
3. Select your drive from the menu that appears.
4. After a moment, Windows will display a message that your
hardware can be safely removed.

For Mac OS Users:

1. If you have files located on your drive open in any applications,
close them.
2. Locate the icon for your drive on the desktop, and drag it to the
trash.
Note: Please wait for the display to refresh fully before
unplugging the drive. If you unplug the drive too soon you will
not get an updated display.
5