Lanaform Mili Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Thank you for choosing the «Mili»diffuser by LANAFORM®. The «Mili» essential oil diffuser combines design and well-being. «Mili» can be personalised to suit your preferences and interior
design.
It is a decorative object designed to allow you to enjoy the benefits of essential oils.
PLEASE READ ALL OF THE INSTRUCTIONS BEFORE USING YOUR DIFFUSER, ESPECIALLY THIS BASIC SAFETY INFORMATION:
• Always place the device on a hard, flat, horizontal surface inside. Keep it away from walls and heat sources such as stoves, radiators, etc.
N.B.: If it is not placed on a horizontal surface, it may not work properly.
• Check that your mains voltage is the same as that of your device.
• Do not connect or disconnect the plug with wet hands.
• If the power cable is damaged, it must be replaced with the same type of cable which is available from the supplier or its after-sales department.
• Do not leave the device in the sun for a long period of time.
• Do not dismantle the device entirely.
• Do not switch the device on if there is no water in the reservoir.
• Do not lift the cover of the diffuser when the device is on. If you notice a suspicious odour or noise, switch the device off immediately and consult the «Troubleshooting» section of these
instructions for use. If the problem persists, ask the supplier or its after-sales department to check the device.
• Do not use essential oils that are not recommended for diffusion. To find out which essential oils are recommended, consult the advice provided in these instructions for use. • Do not use
essential oils or room fragrances without water.
• Do not use perfume or synthetic essences as these could damage the device.
• Unplug the device before cleaning it.
• Do not wash the entire unit with water and do not immerse it in water. Consult the cleaning instructions in these instructions for use.
• For ambiance diffusion only, do not inhale.
• To be used in an environment from 10°C to 30°C.
• Never scrape the transducer with a hard tool. Consult the cleaning instructions in these instructions for use.
• The device should be used preferably for 30 minutes at a time, but can be used several times a day if you wish. Continuous use of the diffuser can, in the long term, damage the product and
reduce its lifespan.
• If any water enters the device, unplug the diffuser immediately and leave it to air-dry for at least 3 days before using it again.
• Be sure to never empty the water through the exhaust vent. This would damage the diffuser. Tip the water out of the side opposite the exhaust vent.
• This device is not intended for use by people, including children, with reduced physical, sensory or mental capabilities, or people with lack of experience or knowledge, unless someone
responsible for their safety can supervise or instruct them beforehand on how to use the device. Children should be supervised to make sure they do not play with the device.
• Use this device only for its intended purpose, as described in these instructions for use.
COMPONENTS
1. Cover (1)
2. Water reservoir (2)
3. Ceramic disc/Transducer (3)
4. Exhaust vent (4)
5. Water spout (5)
6. Mist outlet (6)
7. Interchangeable ring (7)
8. Inner plastic cover (8)
9. ON/OFF button (9)
10. Transformer (10)
EN
Mili
7

Publicidad

Tabla de contenido
loading

Tabla de contenido