Power Dynamics PDD-SERIE Manual De Instrucciones página 5

Connect to mains power
Before plugging the unit in always make sure that the power supply matches the product specification
voltage. First connect the IEC end of the cordset to the IEC connector on the amplifier then plug the other
end of the cordset to the AC mains.
Please read instructions below for reliable and problem free use:

Be sure all connections made are made in the correct way.

Check if the connected speakers are compatible with the amplifier.

Ensure there is adequate ventilation.

Prevent exposure to moisture.

Never plug speakers in/or out while in use, this can result in serious damage.
5 - 23