Setting The Low Fuel Alarm; Alarm Activation; Resetting The Trip Log Or The Total Log - NorthStar Explorer F210 Manual De Instalación Y Manejo

Setting the low fuel alarm

Use the key to select the alarm function. The

LCD will indicate
 
display the present alarm value. If no alarm value
has been entered the LCD will indicate

FLOW

 
Press and hold both keys for three seconds and the
displayed value will begin to flash.
Press and hold for 3 seconds

Use the and keys to select the desired alarm
value. Press and hold both keys for one second
to save this new value to memory and to exit this
function. The display will indicate
the new value.


The arrow pointing at the alarm bell will be acti-
vated.
for two seconds and will then

 
TOTAL


and then



Northstar

Alarm activation

If the fuel remaining value drops below the fuel
alarm value, the alarm will sound and the alarm
arrow will flash.
.
Press any key to mute the alarm. The alarm arrow
will continue to flash as long as the alarm condi-
tion remains.
Resetting the TRIP LOG or
the TOTAL LOG
To reset a log, press the
indicates the name of the log to be reset.
Press and hold both keys for three seconds. Dis-
play will show
resetting to zero.
 
The trip log value may be reset without changing
the total log value.
If the total log is reset to zero, then the trip log
will automatically reset to zero.
If the total log exceeds 999 then both it
and the trip log will be reset to zero.
F210 Installation and Operation Manual

key until the display
   
or for 2 seconds before
 
Press and hold for 3 seconds

Note :

5