Selecting The Channel Directly; Receiving Weather Or Traffic Information From Sat Radio; Ipod ® (Optional); Playback - Alpine IVA-W200 Manual De Instrucciones

Selecting the Channel directly

You can directly select the channel number on the display of the
numeric keypad.
1
Touch [P1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Touch [10KEY].
The numeric keypad input screen is displayed.
3
Touch to input the channel number.
4
Touch [ENT].
The selected channel is received.
Receiving Weather or Traffic information
from SAT Radio
1
Touch and hold [NO/NAME] for at least 2 seconds
in the XM or SIRIUS mode.
The received weather or traffic channel is stored.
2
Press and hold MUTE/SAT for at least 2 seconds.
The stored Weather or Traffic channel is recalled.
3
Press and hold MUTE/SAT for at least 2 seconds.
Returns to the normal mode.
• Stored channels can also be recalled by pressing and holding MUTE/
SAT for at least 2 seconds, even in modes other than XM or SIRIUS
mode.
• Channels other than Weather or Traffic information can also be
stored and recalled.
52
-EN
®
iPod (Optional)
®
An iPod can be connected to the IVA-W200 by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i). When the
IVA-W200 is connected by using the cable, the controls on the iPod are
not functional.
About iPod usable with this unit
The unit can be used with third generation and above iPod, iPod photo,
iPod minis or iPod nano. iPod Shuffle cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Fourth generation iPod: Ver 3.0.2
iPod photo: Ver.1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
• The unit cannot be used with the software versions earlier
than "2005-02-22". For details about "iPod Software
Update," refer to the iPod Instruction Manual.

Playback

1
Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2
Touch [iPod].
The display shows the iPod mode screen.
3
Touch [ ] or [
Return to the beginning of the current song:
Touch [ ].
Fast backward:
Touch and hold [ ].
Advance to the beginning of the next song:
Touch [ ].
Fast forward:
Touch and hold [ ].
4
To pause playback, touch [
Touching [ / ] again will resume playback.
• If a song is playing on the iPod when it is connected to the IVA-
W200, it will continue playing after the connection.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
IVA-W200. Therefore, a maximum of 250 characters is
recommended. The maximum number of characters for the head unit
is 128 (128 byte).
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed when text information is not
compatible with the IVA-W200.
] to select the desired song.
/ ].