Storage; Disposal; What If There Are Problems; Technical Data - Beurer HK 58 Instrucciones Para El Uso

Ocultar thumbs Ver también para HK 58:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
CAUTION
• Do not use pegs or similar items to attach the heating pad to the clothes horse. Otherwise the
heating pad may be damaged.
• Do not reconnect the controller to the heating pad until the plug-in coupling, heating pad and textile
cover are completely dry. Otherwise the heating pad may be damaged.
WARNING
• Never switch the heating pad on to dry it! Otherwise there is a risk of electric shock.

6. Storage

If you do not plan to use the heating pad for a long period of time, we recommend that you store it in the
original packaging. For this purpose, disconnect the controller from the heating pad by unplugging the
plug-in coupling.
CAUTION
Please allow the heating pad to cool down before storing. Otherwise the
heating pad may be damaged. To avoid sharp folds in the heating pad,
do not place any objects on top of it while it is being stored.

7. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?

Problem
The temperature settings are not illuminated while
- the controller is properly connected to the heating pad
- the mains plug is connected to a working socket
- the side sliding switch on the controller is set to setting
"I" (ON)

9. Technical data

See the rating plate label on the heating pad.

10. Warranty / service

In case of a claim under the warranty please contact your local dealer or the local representation which is
mentioned in the list "service international".
In case of returning the unit please add a copy of your receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 3 years or- if longer- the country specific warranty
period from date of Purchase.
In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or
invoice.
2. Repairs (complete unit or parts of the unit) do not extend the warranty period.
Cause
The safety system has
switched the heating
pad off permanently.
14
Solution
Send the heating pad
and the controller for
servicing.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hk 125xxl

Tabla de contenido