Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation guide
1. Introduction
The ilmo 50 S WT motor is non-adjustable: a simple connection is all that is required.
The ilmo 50 S WT motor programs its end limits automatically.
The ilmo 50 S WT motor comprises two inseparable components:
•
the ilmo WT module, the component that houses the electronics of the motor,
and
•
the S tubular module, which contains the drive part of the motor.
The ilmo 50 S WT is designed to drive roller shutters fitted with rigid links and end
stops selected in accordance with the operating conditions described below.
The ilmo 50 S WT motor can be mounted either on the right or the left. It can
be controlled from a control point with a fixed position or momentary action-type
switch
The ilmo 50 S WT motor is equipped with:
obstacle protection to protect the roller shutter when it is being lowered.
-
anti-freeze protection to protect the roller shutter when it is being raised.
-
2. Safety
2.1 General information
Before installing and using the product, please read the installation guide carefully.
This Somfy product must be installed by a professional motorisation and home auto-
mation installer, for whom these instructions are intended.
Never begin installing without first checking the compatibility of this product with the
associated equipment and accessories.
These instructions describe how to install, commission and operate this product.
Moreover, the installer must comply with current standards and legislation in the
country in which the product is being installed, and inform his customers of the
operating and maintenance conditions for the product.
Copyright © 2008 - 2009 Somfy SAS. All rights reserved.
54273X03_ilmo50Swt.indb 35
Contents
35
35
35
36
36
37
37
37
38
38
38
39
ilmo 50 S WT
39
39
40
40
40
40
40
42
35
5/02/09 17:28:45
Publicidad
Capítulos
Tabla de contenido
