Maintenance And Servicing; Rectifying Faults - Bosch GHJ XS 12+18V Unisex Professional Manual Original

12 | English
Setting the Heating Level
The heating level is indicated by the colour of the LED on the
on/off switch (1).
LED Thermal output
Red High
Green Medium
Blue Low
Repeatedly press the on/off switch (1) until the LED displays
the required heating level.
Set the lowest heating level (blue) for continuous op-
u
eration. In the event of overheating, there is a risk of gar-
ment malfunction and of injury.
Charging External USB Devices (see figure D)
You can use the USB port on the battery adapter to increase
the battery runtime of various battery-operated USB
devices, e.g. mobile phones or MP3 players. This can also be
done whilst the garment is being heated.
Ensure that your external USB device can be charged
u
using the USB port on the battery adapter. Refer to
the specifications related to this topic in "Technical
data".
Connect the charging cable of your USB device to the USB
socket (11) on the battery adapter (2).
Press the activation button (12) for approx. three seconds.
The connected USB device will be charged.
To save energy, the USB port is automatically deactivated
after approx. 2 hours. If no charging cable is connected, the
USB port is automatically deactivated after 30 seconds.

Rectifying Faults

Problem Corrective measures
Garment is not being heated. Charge the battery.
Connect the connector plug
(4) correctly.
Press and hold the on/off
switch (1) until the LED
lights up red.
One or more heating ele- Contact the garment retailer.
ments are not heating up.
Garment switches itself off Overheating protection is ac-
automatically. tivated: Press the on/off
switch (1) to switch off the
heating elements and leave
garment to cool down for ap-
prox. 30 minutes.
Contact the garment retailer.
External USB device cannot Charge the battery.
be charged using the USB
Connect the charging cable
port.
of the external USB device to
the USB socket (11) on the
battery adapter (2).
1 609 92A 4VV | (07.12.2018)
Problem Corrective measures
Press the activation button
(12) for approx. three
seconds.
The external USB device can-
not be charged using the
USB port on the battery ad-
apter (refer to specifications
in "Technical data"
A) Some external USB devices cannot be charged with this battery
adapter despite being consistent with the technical data.

Maintenance and Servicing

Before undertaking any work on the garment itself
u
(e.g. cleaning, etc.), as well as during transport and
storage, remove the battery from the battery adapter.
Cleaning
Remove the battery adapter from the garment before
u
cleaning. If the battery adapter becomes wet, it can
cause a malfunction of the garment.
Remove all contents from the pockets when cleaning the gar-
ment, especially the battery adapter (2), the battery (7) and
any connected USB cables. The connector plug (4) can be
washed with the garment.
Follow the instructions on the care label in the garment:
Machine wash on medium temperature setting
Do not bleach
Tumble-dry on low temperature setting
Do not iron
Do not wring out
Do not dry clean
Not to be used by very young children (0–3
years)
Do not insert pins
A)
).
Bosch Power Tools