Peavey Q 215FX Manual Del Propieratio página 6

All specifications are typical unless otherwise noted.
0 dBV = l volt
All specifications are referenced to nominal output level (0 dBV)
unless otherwise stated.
All measurements are wideband 20 Hz to 20 kHz unless
otherwise stated.
NOTE: All specs measured at 1 V RMS input and unbalanced
output.
All sliders at mid position, all switches out unless otherwise
noted.
Frequency Response:
±1 dB 20 Hz to 20 kHz
Distortion:
.005% 20 Hz to 20 kHz
Input Impedance:
Balanced 20 k ohms (equal impedances to
ground)
Output Impedance:
330 ohms
Maximum Input Level:
+18 dBV (8 V RMS)
Maximum Output Level:
+18 dBV (8 V RMS)
Nominal Input Level:
0 dBV (1 V RMS)
Nominal Output Level:
0 dBV (1 V RMS)
™
Q 215FX SPECIFICATIONS
U.S. Patent pending for circuit providing visual indication of feedback.
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
Input Headroom:
Nominal 18 dB
Output Headroom:
18 dB
Output Noise:
EQ in bypass: -100 dBV
EQ in. all flat: -98 dBV
Filter Frequencies:
25 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz,
400 Hz, 630 Hz, l kHz, 1.6 kHz, 2.5 kHz, 4 kHz,
6.3 kHz, 10 kHz, and 16 kHz
Filter Q:
2.3
Maximum Boost and Cut Filter:
+12 dB, -18 dB
Maximum Boost and Cut Gain: (Wideband Gain)
±15 dB
Low Cut Filter:
40 Hz
Power Consumption:
Domestic: 120 V AC, 60 Hz, 20 watts
Export: 220/230-240 V AC, 50/60 Hz, 20 watts
Dimensions and Weight:
3.5" H x 19" W x 11.375" D
10.1 lbs.
TM ®
6