Rhythm Programming; Status Memory - Schubert Etude 450 USB Manual De Instrucciones

Records playback
• When the recording function is enabled, press the [PLAY] to playback the record.
• During playback process, you can press [PLAY] again to stop playback.

Rhythm programming

Press [PROG] to enable the rhythm programming function. "Program" will show on the screen, and the key-
board percussion will be activated. Under this mode, you can create custom rhythms by playing the corres-
ponding percussion keys. The programmed rhythm will be cleaned upon reprogramming or shutdown of the
keyboard.
Stop programming
• When the maximum of 32 pieces of percussion music are recorded, "Full" will show on the screen, and
programming will stop automatically.
• During the programming process, you can press [PLAY] to stop programming and playback the program-
med rhythm.
• Press [PROG] to disenabled the rhythm programming function and clean all programmed data.
Programmed rhythm playback
• When the programming function is enabled, press [PLAY] to playback programmed rhythm.
• During playback process, you can press [PLAY] again to stop playback.
With the status memory function, you can save the tone, tempo, speed and other parameters set during play-
ing. This keyboard is equipped with 4 status memories, which can be flexibly called at any time during playing.
Storage of status memory
Set the tone, rhythm and tempo as required, and then press [Memory] and one of [M1] to [M4] to save the
current status.
Calling of status memory
• Press any one of [M1] to [M4] to call the parameters saved under this memory to replace the current status.
• No power failure protection is provided for the saved contents, so the saved contents will loss after the
electronic keyboard is restarted after power cut.
Rhythm Programming

Status Memory

24