Publicidad
Idiomas disponibles
Idiomas disponibles
Settings
Function F6, Service indicator 1
The maximum amount of programmable running hours before a revision service is required. This
register will count down per 1000 minutes of relay 1 activity. The value of this register represents the
number x 1000 minutes, e.g. 5 = 5000 minutes. When the counter reaches zero, the "SR" message
will appear on the display. This is the standard message to indicate that a revision "service" is
required. The maximum value to be programmed is 254 (x 1000 minutes). If the value is set at 255,
the service counter is out of action.
Note: The timer will keep running as usual.
Function F7, Service indicator 2
This service counter works as described in function F6 but as soon as this counter has counted down
to zero (service counter = 0), the SunTimer
Function FA, Standard or external start mode
Setting "00": The SunTimer
more than 200 thousands of seconds by means of an external connection.
Setting "01": The SunTimer
seconds and a maximum of 200 thousands of seconds by means of an external connection. This
setting is particularly useful to connect a mechanical coin-acceptor unit.
Note: If "01" is chosen, dipswitch 3 (Timer key) has to be disconnected.
Function FB, Running time counter (reset possible)
The running time counter is an electronic counter, which registers cumulatively the number of minutes
the main channel, relay 1, has been operative. The main channel relay 1 is only active during the
main time of the SunTimer
The 6-digit counter is read back to front, as follows;
first counter
1
=
second counter 2
=
third counter
3
=
forth counter
4
=
fifth counter
5
=
sixth counter
6
=
In this example the total running time amounts to 005731 minutes
Resetting the counters
After reading the counters, these can be reset. The reset-procedure is as follows;
1, After having read the count (6X) press the Start/Pause (up) and the Stop (down) keys
simultaneously
-
-- (2 hyphens) will appear on the display
2, To reset the counter press the Start/Pause key,
-
"CL" will appear on the display
3, Now press the Start/Pause (up) and the Stop (down) keys simultaneously
-
the counters are reset and the SunTimer
Note: if necessary, you can also read out the indication on the counter without resetting it during the
stand-by period, to do so, press the Stop key during 3 seconds. The indication of the counters of
Function FB will be represented automatically, but cannot be reset.
Function FC, Start pulse counter (reset possible)
Reading and reset procedure as in function FB. This counter reproduces the number of start pulses.
®
is inhibited.
®
can be started by pressing the Timer key or by generating a pulse of
®
can be started by generating a pulse of a minimum of 20 thousands of
®
. It is possible to scroll the counters by pressing the Start/Pause key (Up).
value
"1",
1
1
value
"3",
2
3
value
"7",
3
7
value
"5",
4
5
value
"0",
5
0
value
6
0
"0",
®
will automatically resume its function.
®
SunTimer
2400 Version 3.0 25-01-2008
-
www.inepro.com
-
11
Publicidad
