EBARA HERTZ ONE Manual página 24

8 CONTROL BUTTONS AND SIGNAL LIGHTS
Symbol Function
Ref.
Red signal light that indicates a general alarm with displayed code
!
Alarms list in table 9.2.3.
Yellow signal light that indicates that electric pump P1 is in standby.
P1
P1
Green signal light that indicated that electric pump P1 is on.
Yellow signal light that indicates that electric pump P2 is in standby.
P2
Green signal light that indicated that electric pump P2 is on.
Yellow signal light that indicates that electric pump P3 is in standby.
Green signal light that indicated that electric pump P3 is on.
Button that stops the automatic running of electric pump P1; the
STOP
START
START = Pressed for 1 second, prepares the electric pump P1 for AUTOMATIC starting.
MANUAL
MANUAL = Pressed for 5 seconds, starts the electric pump that stops when released.
P1
Button that stops the automatic running of electric pump P2.
STOP
START = Pressed for 1 second, prepares the electric pump P2 for AUTOMATIC starting.
START
MANUAL = Pressed for 5 seconds, starts the electric pump that stops when released.
MANUAL
P2
Button that stops the automatic running of electric pump P3
STOP
START = Pressed for 1 second, prepares the electric pump P3 for AUTOMATIC starting.
START
MANUAL = Pressed for 5 seconds, starts the electric pump that stops when released.
MANUAL
P3
Button to confirm the modified data.
Button to increase the number to be modified or to pass to the line above of the parameters.
Button to decrease the number to be modified or to pass to the line below of the parameters
Button to select the number to be modified.
QS1
Mains power supply cutout switch with lockable door handle.
ENGLISH
P1
LED switches off.
23