Safety Instructions - Marmitek MegaView 241 UHD 2.0 Modo De Empleo

2 Safety instructions

Please read these instructions thoroughly before you use the device and keep

them for future reference.
Only for indoor use.

Do not use the product in a damp environment or near water.

Do not expose the product to extremely high or low temperatures, strong light

sources or direct sunlight.
This product is not a toy. Keep out of reach of children.

Do not open the product (battery panel is an exception): the device may contain

live parts.
Keep batteries out of the reach of children. Dispose of batteries as chemical

waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
Connect the adapter to the mains only after you have verified that the line voltage

corresponds to the value specified on the type plates.
Never connect a power adapter if it's damaged. In such cases, please contact

your supplier.
Repairs or service should only be performed by qualified personnel.

Disconnect the power adapter from the mains when this device is not in use for

prolonged time.
Improper use, self-installed modifications or repairs will void any and all

warranties.
Marmitek does not accept any product responsibility for incorrect use of the

product or use other than for which the product is intended.
Marmitek does not accept liability for any consequential damage other than the

legal product responsibility.
4 © MARMITEK