Descargar Imprimir esta página

Chicco Best Friend Comfort Instrucciones De Uso página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
properly to the stroller before plac-
ing your child inside.
• Products exposed to direct sun-
light will heat up; leave them to
cool down before placing the child
inside.
• The carrycot is not designed for
children to sleep in for long periods
of time: this product is not a substi-
tute for a cot.
• It is recommended that the carrycot
be aired out after prolonged use.
• Before lifting or transporting the
carrycot, the base needs to be ad-
justed to the lowest position.
• In the carrycot, your child' s head
must never be lower than their body.
• Keep the carrycot out of reach of
children when it is not in use.
• WARNING: The restraint system
must be used only when transpor-
ting your child in the car.
• WARNING: The restraint system
must be removed when the pro-
duct is used outside the car.
TIPS FOR CLEANING AND MAINTENANCE
This product requires periodical maintenance.
Cleaning and maintenance operations must be performed
exclusively by an adult.
CLEANING
Clean all fabric parts with a damp sponge and neutral de-
tergent. Please refer to the care labels for instructions on
how to clean the fabric parts.
Periodically wipe the plastic parts clean with a soft damp
cloth. Do not use solvents or abrasive products.
Always dry the metal parts to prevent the formation of rust
if the stroller has come into contact with water.
WASHING
The external/internal lining of the carrycot and the mattress
are removable and washable; to remove them, please refer
to the REMOVING THE CARRYCOT LINING section.
The washing symbols and relative meanings are listed below:
Wash by hand in cold water
30° C
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
MAINTENANCE
If necessary, lubricate with dry silicone lubricant. To prevent
the formation of rust, always dry metal parts. Do not sub-
merge the carrycot in water. Periodically clean plastic parts
with a damp cloth. To avoid friction, ensure that the lock-
ing devices of the carrycot and stroller are free from dust
or sand. Do not leave the product exposed to the sun for a
long period of time; the fabrics may discolour.
CARRYCOT COMPONENTS
The carrycot is comprehensive of the following compo-
nents:
- Fabric lining
- Removable mattress
- Hood
- Cover
- Car Kit 2013
NB: The images and instructions in this manual refer to a
single carrycot version. Some of the components and func-
tions described here may vary depending on the model
purchased.
ATTACHING AND REMOVING THE HOOD
The carrycot comes with a hood that can adjusted in dif-
ferent positions.
To attach the hood:
1. Insert the metal ends of the hood arch into the desig-
nated housings found on the plastic joints of the handle
(Fig. 1).
2. Join and close the zip (Fig. 2) then fasten the buttons
found on the side of the carrycot (Fig. 2A).
To remove the hood:
3. Unfasten the buttons, open the zip (Fig. 3) and release
the arch from the designated housings by pressing the
two buttons located on the plastic joints of the handle
(Fig. 3A). The arch can be separated from the hood fabric
by unfastening the two buttons that fix it to the fabric
and pulling on one of the two ends (Fig. 3B).
WARNING: Carefully store the removed arch, keeping it out
of the reach of children.
CARRYCOT LINING
4. Put the carrycot cover into position and fix it into place
by fastening the designated buttons (Fig. 4). For added
protection, lift the fabric flap and fix it in place using the
buttons on the hood (Fig. 4A).
5. The cover of the carrycot can be used as leg cover for the
stroller. Refer to the instruction manual of the stroller for
details about the assembly of the leg cover configuration.
REMOVING THE CARRYCOT LINING
Before beginning the carrycot lining removal process, it is
necessary to remove:
- Mattress
- Hood, as outlined in point 3
10

Publicidad

loading