Bulova 933 Manual De Instrucciones página 5

one step – BUT holding the button down will advance the hand rapidly.
1. Pull the crown out to position "2".
2. If the Chrono second hand is not positioned at the "0" or 12 o'clock position, push button
"A" firmly to adjust the hand correctly.
3. If the 1/10 second hand (small dial at 2 o'clock) is not positioned at the "0" or 12 o'clock
position, push button "B" firmly to adjust the hand correctly.
4. Push the crown back to the "NORMAL" wearing position.
D. USING THE CHRONOGRAPH (CHRONO)
NOTE: The maximum Chrono reading is 60 minutes.
1. Push Button "A" to start the chronograph. Push button "A" again to stop the
Chronograph.
2. Push button "B" to return the chronograph to the "Zero" or starting point.
3. The Chronograph can be stopped and started again. Push Button "A", repeatedly, to "ADD"
times together, up to 60 minutes.
HOW TO USE THE TACHYMETER (ON SOME MODELS)
The Chrono second hand only is used for this function.
Step 1. Push and release button "A", precisely at the start of a measured kilometer (mile).
Step 2. At the end of the measured kilometer (mile), push and release button "A" again
Step 3. The Hand position, on the numbered scale at the dial perimeter, indicates your
speed in kilometers (miles) per hour.
Step 4. Reset by pushing and releasing button "B".
5