Multi-Function Keys - Uniden MC 1020 Guia De Funcionamiento

Multi-Function Keys

3. STEP - This key is used to step through the channels entered in the
Memory Scan Mode. When pressed and held, this key also starts and
stops the SCAN Mode.
• Press STEP to step to a desired channel.
• Press and hold STEP to begin the Channel Scan Mode and initiate
Triple Watch automatically.
4. H/L - This key is used to switch between HI (25 Watts) where allowed, or
LO (1 Watt) output power. When pressed and held, this key activates the
PA mode and, when used in conjunction with the MEM key, this key
adjusts the brightness of the LCD Panel and the TX LED indicator.
• Press H/L to switch between HI and LO output power.
• Press and hold H/L to access the Public Address Mode.
• Press and hold MEM, and then press H/L to adjust the brightness
of the LCD Panel backlight and the brightness of the TX LED
indicator.
The LCD Panel backlight and TX LED indicator are at their
brightest level when the MC 1020 is shipped from the factory.
5. MEM - This key enters channels in the Memory Scan Mode. When used
in conjunction with H/L, the LCD Panel lighting can be adjusted. When
used in conjunction with the 16/9 key, the Channel Mode of Operation can
be selected.
• Press MEM to enter a selected channel in Memory Scan Mode.
• Press and hold MEM, then press H/L to adjust the LCD Panel light
intensity from a bright to a dim setting. Repeat this action to return
to the bright intesity setting.
• Press and hold MEM, and then press 16/9 to change the Channel
Mode of Operation between US, International, or Canada.
7 6 5 4
7
3 2