Danze Brulée DF022124 Instrucciones De Instalación página 5

7
8. Remove screws (C1) and black washers (C2)
from anchors (C). Tap anchors (C) into the holes
until they are flush against the surface. Use a
hammer if necessary.
9. Set the vanity (A) back to the intended posi-
tion, aligning holes with anchor positions.
10. Install the anchor hardware (B) in the follow-
ing order: flat washer (S), black washer (C2),
and screw (C1). Turn screws (C1) using Phillips
screwdriver until the anchors (C) expand inside
wall.
11. Install the Cirtangular
to the installation instructions provided with the
lavatory. The top of your Cirtangular-Brulée
vanity (A) features a channel custom fit for
your lavatory to provide a solid seal and clean,
straight lines.
12. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the ap-
propriate location.
13. If needed, drawer glides can be adjusted for
height.
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
lavatory according
®
®
8