Assembly; Operation - Craftsman 315.116890 Manual Del Operador

UnPacKinG
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WArninG:
This new product has been shipped
completely assembled. Do not operate the product
if it is not completely assembled or if any part ap-
pears to be missing and call the customer service
number below for assistance. Carefully check the
packing list below to ensure all items are included
in the package; the packing list describes all loose
items that are not assembled to the product as
shipped. Operation of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
WArninG:
Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
WArninG:
Always wear eye protection marked to
comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes resulting in
possible serious injury.
WArninG:
Do not use any attachments or
accessories not recommended by the manufacturer
of this tool. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLiCATiOns
You may use this product for the purposes listed below:
 Drilling in all types of wood products (lumber, plywood,
paneling, composition board, and hard board)
 Drilling in ceramics, plastics, fiberglass, and laminates
 Drilling in metals

aSSemblY

PACKinG LisT
Drill-Driver
Double-ended Bit
Battery
Charger
Operator's Manual
WArninG:
do not operate this tool until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WArninG:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WArninG:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.

OPerATiOn

This product will accept DieHard
tery packs and Craftsman 19.2 V nickel-cadmium battery
packs.
For complete charging instructions, refer to the Opera-
tor's Manual for the battery packs and chargers listed in
the General Safety Rules.
led FUncTionS oF cHarGer
led Will be on To indicaTe STaTUS oF
CHArGer And BATTerY PACK:
 Red LED on = Battery pack is charging
 Orange LED = Charger is evaluating battery pack
CHArGinG THe BATTerY PACK
See Figure 2.
Use only these craftsman 19.2 V battery packs with
this charger: 140107001 (130279003 and 130279005)
The battery pack for this tool has been shipped in a low
charge condition to prevent possible problems. Therefore,
you should charge them before use.
nOTe: Batteries will not reach full charge the first time
they are charged. Allow several cycles (operation followed
by recharging) for them to become fully charged.
8 - English
If any parts are damaged or missing
Do not attempt to modify this tool
To prevent accidental starting that
19.2 V lithium-ion bat-
®