Bracketron RoadTripper BT5-548-2 Manual Del Usuario página 5

PLAYING MUSIC ON YOUR PHONE
³ This product supports A2DP function, which allows you to
play music on your phone. Music will be transmitted to your
car stereo via FM transmitter function of the product so that
you can enjoy music with higher quality.
³ Plug the transmitter into the car cigarette lighter socket and
switch power to ON. Make sure your phone's Bluetooth is
"paired" with the transmitter. If not, follow the steps under
"Bluetooth Pairing".
³ Turn the car stereo ON and choose FM radio mode.
Choose an open station/frequency where there is no radio
broadcast.
³ Adjust the transmitter's FM radio station to match the
FM radio station of your car stereo by pressing/holding
button for a few seconds. The digital radio station frequency
on the LED display will flash. Change the radio station up/
down by short pressing "+|-" keys . Hold +|- keys to increase/
decrease the radio station quickly. Radio Station frequency is
adjustable within 87.5 - 108.
³ Example: If your car's FM radio station is set to 107.7, set
the transmitter to the same frequency (display should show
"107.7").
³ Once the radio station frequencies are matched, simply
play the music by selecting "play" on your phone's music
player.
³ You can also control your music player through the trans-
mitter by pressing key to play/pause or pressing "+|-" keys
to select the next/last song (note: some phones with older
operating systems may not support this function).