Belkin OmniView Enterprise Serie Guía De Instalación Rápida página 6

P74239ea_F1DE101G_QIG.qxd 17-04-2003 15:53
7. Under Setting & Configurations, click on "Network". (Note: Uncheck "DHCP"
check box.)
8. Enter the desired network settings and click on "Apply Changes" to save
new network settings.
9. Reset the local IP address settings on the computer used for configuration
of the RIPC.
Page 8
6
Connecting the RIPC to the Network
Connect the RIPC to the network using a straight-through RJ45 Category 5
network cable.
You are now ready to use the RIPC. Please refer to your User Manual for
additional information.