Regional Code; Using Progressive Scan; Controls And Connections - Insignia NS-H2001 Guia Del Usuario

Regional code

Your receiver has a regional code printed on the
back of the case. Your receiver can play only
DVDs labeled with the same regional code or
ALL.
Notes
• Most DVDs have a globe with one or more numbers in it
clearly visible on the cover. This number must match your
receiver's regional code or the DVD cannot play.
• If you try to play a DVD with a different regional code from
the receiver, the message "Wrong Region" appears on the
TV screen.

Using progressive scan

You should note that not all high definition
televisions are fully compatible with this home
theater system and may cause artifacts to be
displayed in the picture.
In case of 525 or 625 progressive scan picture
problems, we recommend that you switch the
connection to the standard definition output. If
there are questions regarding your television's
compatibility with this DVD player, contact our
customer service center.
Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic" and the double- D symbol are
trademarks of Dolby Laboratories.

Controls and connections

Front panel
1
2
Item Description
1 STANDBY/ON button
2 Disc tray
3
OPEN/CLOSE
button
4
PLAY/PAUSE
button
5
STOP button
6 LEVEL
7 SOURCE
8
PREVIOUS /
RADIO SCAN -
9
NEXT /RADIO
SCAN +
10 DISPLAY
11 Remote sensor
12 VOL +/-
6
LEVEL
9
5 7
11
3 4 6 8
10 12
Function
Press to toggle the DVD receiver on
(LED off) or off (LED on.
Place a disc on the tray when it
opens.
Press to open or close the disc tray.
Press to start playback. When a disc
is playing, press to pause playback.
Press again to resume playback.
Press to stop disc playback.
Press to review or adjust each
speaker's output level.
Press to select the audio input
source you want.
Press to skip to the previous
chapter or track, or to tune the radio
to a lower frequency station.
Press to skip to the next chapter or
track, or to tune the radio to a
higher frequency station.
Shows the current status of the
DVD receiver.
Receives signals from the remote
control.
Press to increase or decrease the
volume.
www.insignia-products.com
Back panel
2
1
Item Description
1 AC power cord
2 Speaker
connections
3 AUDIO (AUX) IN
4 VIDEO OUT
5 S-VIDEO OUT
6 COAXIAL IN
7 COMPONENT
VIDEO OUT
(Y Pb Pr)
8 FM ANT. IN
9 AM ANT. IN
VIDEO OUT COMPONENT
3 5 6 7
4 8
Function
Plug into an AC power outlet.
Connect the right front, left front,
center, right rear, left rear, and
subwoofer speakers here.
Connect to the audio output jacks
from an external source, such as a
VCR or DVD player, to these jacks.
Connect to the video input jack of a
TV.
Connect to the S-Video input jack on
a TV.
Connect to the coaxial (digital) audio
output jacks of a DVD player or VCR.
Connect to the component input
jacks on a TV (if available).
Connect the FM antenna cable to this
jack.
Connect the AM loop antenna cable
to this jack.
9