Repairs; Environmental Protection; Technical Specifications - Metabo KSA 18 LTX Manual Original

For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Guide rail (guide plate 6.31019 is required)
B Guide plate.
For securing the circular saw on the guide rail
6.31213
C 2 clamp clips. To secure the guide rail.
D Circular saw blades. For wood and similar
materials. Medium cutting quality.
E Battery pack
F Chargers
G Metabo universal vacuum cleaner
H Suction hose
I Adapter

11 Repairs

Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service
centre. For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

12 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that can
be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact
with water!
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.

13 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
n = No-load speed
0
T = Adjustable depth of cut (90°)
90°
T = Adjustable depth of cut (45°)
45°
A = Adjustable diagonal cut angle
Ø = Saw blade diameter
d = Saw blade drill diameter
a = Max. base body thickness of saw blade
b = Max. cutting width of saw blade
m = Weight
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
a = Vibration emission value
h, D
(Sawing chip board)
K = Uncertainty (vibration)
h,D
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It is also
suitable for a provisional estimate of the vibratory
load.
The specified vibration level applies to the main
applications of the power tool. However if the tool
is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This can considerably
increase the vibratory load over the entire working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly
reduce the exposure level over the total working
period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Typical A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty (noise level)
pA WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
17