Installing (Or Replacing The Batteries) - A&D Medical UC-352BLE Manual De Instrucciones

Installing (or replacing) the batteries
1. Open the battery compartment cover on the
underside of the scale.
2. Install four new AAA size alkaline
batteries with the positive (+) and
negative (-) terminals properly aligned
with the corresponding symbols in the
battery compartment.
3. Close the battery compartment cover.
Install each battery with the positive (+) and negative (-) terminals properly aligned with the
corresponding symbols in the battery compartment.
Improper installation of the batteries may cause battery leakage.
Replace all four batteries with new ones, when the
Do not mix new and used batteries. It may cause damage to the scale or shorten the battery life.
Be sure to use AAA
Never use rechargeable batteries with this scale.
The battery life is dependant upon the environmental temperature, battery type and usage.
The batteries provided with the device are for testing the scale performance and may have a
limited life.
Remove the batteries from the battery compartment, when the scale is not to be used for a long
time. Storing the scale with the batteries installed may result in battery fluid leaking from the
batteries, causing damage to the scale. The supplied batteries are for checking operation of the
scale and may have a short lifespan.
The scale has an "Automatic power-off" function.
After the measurement results are displayed for 60 seconds, the scale is automatically turned off.
size alkaline batteries. Do not use any other type of battery.
Automatic Power off Function
Caution
symbol is displayed.
E-6