Connecting To A Mobile Device (Pairing) - A&D Medical UC-352BLE Manual De Instrucciones

Ocultar thumbs Ver también para UC-352BLE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting to a mobile device (Pairing)

®
This scale needs to be registered with a receiver in order to use Bluetooth
communication with the receiver. The process of registering this scale with a
receiver is known as pairing. When pairing is completed, measurement data
from this scale is automatically sent to the paired device each time a
measurement is made when the receiver is in the state in which it can receive
transmissions.
Consult the receiver instruction manual and set it to enable pairing. If the
receiver has a "pairing wizard", use the wizard to complete pairing. Place the
receiver and this scale as close as possible to carry out pairing.
1. Install four AAA size alkaline batteries into this scale.
• For details, see "Installing (or Replacing) the Batteries".
2. Confirm that the scale is turned off, and
press and hold the set switch.
• When the set switch is continuously pressed,
"Pr" is displayed.
3. Release the set switch when "Pr" is
displayed.
• " " flashes.
• This scale is discoverable by the receiver.
• Pairing can be skipped press the set switch when
"Pr" is displayed.
4. Start pairing on the receiver.
• Follow the pairing instructions for the receiver to search
Beep
for, select and pair with this scale.
5. Confirm that "End" is displayed.
Beep beep
Once paired, changing batteries should not require
re-pairing.
E-7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido