Hardware Contents - Bond BH5002-1 Manual Del Usario

HARDWARE CONTENTS

ASSEMBLY INSTRUCTIONS
* Please keep these owner's manual for future reference.
* Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly (included): Screwdriver (DD)
NOTE: You must follow all steps to properly assemble the firepit. Make sure the gas valve is turned
"OFF" before assembling. Do NOT attempt to assemble without proper tools.
1. Insert legs (D) into holes on the corner of
the leg support (C).
Turn around the leg to match with the mounting hole,
tighten by flat washers (BB), spring washers (AA) and
M6 x 12 mm screws (CC)
5