Numark X2 Manual Rápido Del Comienzo página 10

14. Loop In - is the point where you wish the loop to start. A loop is any area of a CD that you choose
to repeat seamlessly. The initial "CUE" or "PLAY" point of the CD is by default the "Loop In" point.
If you wish to set a new loop-in point, just press "Loop In" while the CD is playing when it reaches
the desired point. The "Loop In" button will light indicating a new loop is set.
button will also illuminate indicating a point has been set and is accessible for "Stutter". The unit
will always remember a point until you set a new point or put in a new CD. The new point will be
accessible until you remove the CD from the unit. If you change tracks and you previously set a
"Loop In" on another track, pressing "Reloop" will jump to that point.
Position on CD
and "HOT" point set
Position on CD
15. Loop Out - sets the end point of the loop. The first time you press "Loop Out" while a CD is in play
mode, the "Loop Out" button will turn on and flash while the song automatically returns to the "Loop
In" point with no breaks and continues to play. When the song reaches the "Loop Out" point again,
it jumps to the "Loop In" point and continues to repeat this action.
button will also be flashing during loop action.
second time and play will continue forward when the song passes the previously set "Loop Out"
point. The "Loop Out" button will be lit solid indicating that the loop is now in memory for "Reloop"
purposes. The "Loop Out" point will be erased if "Loop In" is pressed or a new "Cue" point is set
after the "Loop Out" point. This is important because without this point, "Reloop" will not be
possible.
Press
"LOOP IN"
"LOOP IN" point
and "HOT" point set
Press "LOOP IN"
Set "HOT" point
If you wish to change the loop-in point, just press "Loop In" again.
st
1 Press
"LOOP IN"
"LOOP IN" point New "LOOP IN" point
and "HOT" point set
First LOOP interval
Return to first "LOOP IN" point
nd
2 Press
"LOOP OUT"
Releases looping
and continues play
Return of first LOOP
Press "RELOOP"
Start from "HOT" point again
STUTTER interval
Return to "LOOP IN"
nd
2 Press
"LOOP IN"
nd
2
Second LOOP interval
Return to second "LOOP IN" point
To release, or end the loop, press "Loop Out" a
st
1 Press
"LOOP OUT"
Starts looping
First LOOP interval
Second LOOP interval
Return of second loop
8
The "Reloop/Stutter"
Press
"LOOP OUT"
st
1 press starts looping
press releases loop and continues play
You will notice the "Loop In"
rd
3 Press
"LOOP OUT"
Starts new loop