Publicidad
TROUBLESHOOTING
ENGLISH
Make sure machine is turned off and electrical power cord is unplugged.
Problem
Vacuum cleaner
won't turn ON.
Vacuum cleaner
won't pick up dirt.
Tools won't
pick up dirt.
Vacuum cleaner
difficult to push.
Other maintenance or service not included in the manual should be performed
by an authorized service representative.
Cualquier otro mantenimiento o servicio no incluido en el manual deberá ser realizado por un
representante de servicio autorizado.
Les tâches d'entretien ou de maintenance qui ne sont pas inscrites dans ce manuel doivent être
effectuées par un représentant autorisé de service.
20 www.sanitairecommercial.com
Possible causes
Power Cord not plugged in.
Blown fuse/tripped
breakers in home.
Extension cord not connected
properly to unit cord.
Incorrect height adjustment.
Hose not attached to suction
opening.
Twist 'n Snap™ Hose not
securely attached.
Dust bag is full.
Rotating floor brush bristles worn.
Rotating floor brush jammed.
Clog in vacuum.
Crack or hole in hose.
Vacuum hose, wand or tools
clogged.
Incorrect height adjustment.
Rotating floor brush not rotating.
Remedies
Check electrical plug.
Check/replace fuse or reset breaker.
Check connection.
Adjust Powerfoot to correct height
setting.
Grasp hose grip and firmly push onto the
base.
Make sure Twist 'n Snap hose is
snapped into position.
Replace with new dust bag.
Replace brush.
Remove brush and clean debris from
brush ends.
Follow instructions for clearing clogs on
page 16.
Replace hose.
Follow instructions for clearing clogs.
Turn Height Adjustment Knob to next
highest setting.
Check drive belt and brush.
Publicidad
