Publicidad
Idiomas disponibles
Idiomas disponibles
================================================================================================
STEP 3-B
(Drilling)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Find the provided Drill Bit (23).
Using the remaining
circular holes of the rocker
plate (1) as a template, drill four
holes through the cart.
Drill Bit (23)
STEP 3-C
(Drilling)
On the other end of the pivot arms (where the cart rim and pivot arms meet)
you'll need to drill four holes that will connect the pivot arms to the bed of the cart.
Slide the drilling template (4) in place as illustrated and
center it over the end of the pivot arm.
Remove and set aside the four Round Head Screws (20) added on Step 3-A,
English Manual
ASSEMBLY
4
the Drilling Template (4) as well as the Pivot Arms (2 & 3).
1
Drill through the template holes, straight into the bed of
the cart. Repeat this step with the other pivot arm.
7
1018671-A
Publicidad
