Agency Symbol Identification - Ingersoll Rand 1200 Manual De Instrucciones

Ingersoll-Rand No. 10
Always use an air line lubricator with these tools. We
recommend the following Filter-Regulator-Lubricator
Unit:

AGENCY SYMBOL IDENTIFICATION

European Community Mark
LUBRICATION
Ingersoll-Rand No. 28
and
Ingersoll-Rand No. 66
INSTALLATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency L
Shut-Off
Valve
Lubricator Regulator
Drain Regularly
Indicates compliance with
relevant EC directives.
Inside USA use FRL unit # C28-04-FKG0-28
Outside USA use FRL unit # C28-C4-FKG0
Before starting the tool and after each two or three hours
of operation, unless the air line lubricator is used, pour
approximately 1.5 cc of Ingersoll-Rand No. 10 Oil into the
air inlet.
Periodically, inject several drops of Ingersoll-Rand No. 10
Oil between the Ratchet Housing and Ratchet Yoke to
lubricate the Drive Bushing.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
FRL
Compressor
3
(Dwg. TPD905-2)
Form P7743 Edition 1