Tabla de contenido
Publicidad
Enlaces rápidos
PFH10
Fusion Pressurized and Dust-Proof Tubular Environmental Camera Housings
PFH10C2W................ A Pressurized tubular housing, 24Vac or 12Vdc input, heater & blower with feed-thru wall / pole mount
PFH10C2WY.............. Pressurized tubular housing, 24Vac or 12Vdc input, heater & blower with feed-thru wall / pole mount, adjustable sunshield
PFH10C8WY.............. Pressurized tubular housing, PoE input with Dynamic Power Allocation, 30 watt midspan included, heater & blower with feed-thru wall /
pole mount, supports .af PoE cameras, adjustable sunshield
DFH10C2W................ Dust-Proof tubular housing, 24Vac or 12Vdc input, heater & blower with feed-thru wall / pole mount
DFH10C2WY.............. Dust-Proof tubular housing, 24Vac or 12Vdc input, heater & blower with feed-thru wall / pole mount, adjustable sunshield
DFH10C8WY.............. Dust-Proof tubular housing, PoE input with Dynamic Power Allocation, 30 watt midspan included, heater & blower with feed-thru wall /
pole mount, supports .af PoE cameras, adjustable sunshield
© 2013, Moog Inc. All Rights Reserved
Moog Inc.
Sensor and Surveillance Systems
3650 Woodhead Drive Northbrook, IL. USA 60062
+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com
Installation and Operation Instructions
Before attempting to connect or operate this product, please
read these instructions completely.
81-IN5480 110513
Publicidad
Tabla de contenido
Manuales relacionados para Moog PFH10
Resumen de contenidos para Moog PFH10
- Página 1 DFH10C8WY....Dust-Proof tubular housing, PoE input with Dynamic Power Allocation, 30 watt midspan included, heater & blower with feed-thru wall / pole mount, supports .af PoE cameras, adjustable sunshield Moog Inc. Sensor and Surveillance Systems 3650 Woodhead Drive Northbrook, IL. USA 60062 81-IN5480 110513 © 2013, Moog Inc. All Rights Reserved +1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com...
-
Página 2: Important Safeguards
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK). - Página 3 Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell.
-
Página 4: Disclaimer Of Warranty
™ During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Manufacturer at Moog Decatur Operations, 2525 Park Central Boulevard, Decatur, Georgia, 30035. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. - Página 5 P F H 1 0 Value Features Optional Accessory Multi-Plane Adjustable SunShield position to protect against glare on lens Cable Feed Through hides and protects cables Pop Out Tabs Lanyard Cable allows for safely retains housing pole mounting during installation Installers Connection Board allows for easy hook-ups Hand Hold...
-
Página 6: Electrical Specifications
Electrical Specifications Contents of Box PFH10 Power 12VDC Class 2 Only 24Vac (No camera) 12Vdc (No camera) PoE: OUT IEEE802.af English Midspan 24Vac (Ninguna cámara) Some Models 12Vdc (Ninguna cámara) PoE: OUT IEEE802.af Español Hardware Packet 24Vac (Aucun appareil-photo) 12Vdc... - Página 7 CAUTION: When assembling the mounting bracket, make sure Proper Assembly of Mounting Bracket all the wiring access holes are facing towards the rear of the base mounts access portal. • PRECAUCIÓN: Al montar la consola de montaje, cerciórese de que todos los agujeros de acceso del cableado son revestimiento hacia la parte posterior del portal bajo del acceso de los montajes.
-
Página 8: Wall Mounting
WALL MOUNTING If running wire through a conduit to the housing mount, rst install Attach mount to wall with suitable hardware (not provided). appropriate ttings to the mount base. • Si se ejecuta a través de un cable de conducto a la carcasa de montaje, primero instale los •... - Página 9 Pole Mount Option (Use Steel Straps to Mount) Gasket Nipples Crimp Cable Ties Cable Cable Feed cable through bracket, pierce the gasket nipples Crimp the connectors as needed. Then use cable ties (as needed). Place the gasket as shown. on the nipples to secure device, leave extra cable. •...
- Página 10 (B- Completely loosen) (A- Slightly loosen) In order to rotate the rear cover, slightly loosen the screw marked (A) and completely loosen the screw marked (B). Then make all of the nessecary wiring connections. • Conecte la tierra entrante con el poste de tierra según lo demostrado. •...
- Página 11 Connect the network cable from the midspan to the connector that is labeled “To Network” connect the camera to the connector labeled “To Camera”. When power is applied the “Heat” LED will turn ON for 5 seconds. 60 seconds the blower will start.
- Página 12 Camera Sled Ring Screw Camera Sled Loosen the screws shown on the picture and turn the camera Install the camera using provided screws and rubber spacer, to sled ring to the desired angle and re-tighten. center lens (if needed). • Afloje los tornillos demostrados en el cuadro y dé...
- Página 13 Pressurize the Unit Cont. Place the air chuck on the ll valve and begin lling until pressure relief valve opens. • Coloque la tirada del aire en la válvula del tanque y comience a llenar hasta que la válvula de descarga de presión se abra.
-
Página 14: Replacement Parts List
Dovrebbe essere intorno a 5-7psi (0.35-0.5bar). Over - Pressure Relief Valve Fill Valve Pressure Gauge Air Chuck NOT INCLUDED Replacement Parts List PFH10 PART # DESCRIPTION 1 RPVL3857 BACK COVER 2 RPVL3863 BACK COVER GASKET 3 RPVALV12...