Tabla de contenido
Publicidad
Enlaces rápidos
www.videolarm.com
P F D 7 C 1 2 N - 3
SView Outdoor Pressurized FusionDome
Installation and Operation Instructions for the following models:
PFD7C12N-3
IP Network Ready 7" Pressurized Outdoor PTZ Camera System with
36x zoom compression, full D1. Clear dome, with 12VDC input, heater/
blower
PFD7C12S-3
(Analog version)
IP Network Ready 7" Pressurized Outdoor PTZ Camera System with
36x zoom compression, full D1. Clear dome, with 12VDC input, heater/
blower
B e fo r e a t t e m p t i n g t o c o n n e c t o r o p e r a t e t h i s p r o d u c t , p l e a s e r e a d t h e s e
i n s t r u c t i o n s c o m p l e t e l y. To b e u s e d w i t h t h e 8 1 - I N 5 4 0 9 I n s t r u c t i o n M a n u a l .
81-IN5424
01-06-2009
Publicidad
Tabla de contenido
Resumen de contenidos para Moog videolarm PF D7C12N-3
- Página 1 www.videolarm.com P F D 7 C 1 2 N - 3 SView Outdoor Pressurized FusionDome Installation and Operation Instructions for the following models: PFD7C12N-3 IP Network Ready 7” Pressurized Outdoor PTZ Camera System with 36x zoom compression, full D1. Clear dome, with 12VDC input, heater/ blower PFD7C12S-3 (Analog version)
-
Página 2: Important Safeguards
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE Do not block any of the ventilation openings. - Página 3 LIMITED WARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosures and Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation /tour operation...
-
Página 4: Electrical Specifications
Contents of Box Electrical Specifications Power 12VDC PFD7C12N-9 Class 2 Only PFD7C12S-9 12 VDC Total Power: 50 Watts Accessories: Heater: 20 Watts/Blower: 2 Watts Camera Power: 28 Watts Tools Required: .100” Flat Head Screwdriver English Phillips Head Screwdriver 7/16” Wrench or Socket 24 VAC Energía Total: 50 vatios Accesorios:... - Página 5 SOLD SEPARATELY SOLD SEPARATELY Wrap Teflon tape around the pipe threads Securely mount bracket to wall. Pull wiring to ensure a tight seal. through bracket and position grommet as shown. • Con seguridad soporte del montaje a emparedar. Tire del cableado •...
- Página 6 SOLD SEPARATELY SOLD SEPARATELY Loop the lanyard over the set screw to Make the appropriate wiring connections temporarily hold housing. from the dome to the gooseneck. • Coloque el acollador sobre el tornillo de presión para • Haga las conexiones apropiadas del cableado de la bóveda celebrar temporalmente la cubierta.
- Página 7 Wire as shown below for analog Wire as shown below for IP models: (PFD7CS-9; PFD7TS-9) models:(PFD7CN-9; PFD7TN-9) RJ45 RJ45 12VDC SNC-RZ50/SNC-RZ30 12VDC Camera/Heater/Blower Yellow SNC-RZ50/SNC-RZ30 50 Watts Camera/Heater/Blower Green Camera/Heater/Blower Yellow 50 Watts Green Camera/Heater/Blower RS-485RX A Blue Alarm 1 Blue RS-485RX B Violet...
- Página 8 CAPTIVE SCREW To install the dome align the tabs and twist To secure in place, tighten captive screw. counter clockwise to secure. • Para instalar la bóveda alinee las lengüetas y tuerza al revés • Para asegurar en lugar, apriete el tornillo prisionero. a la derecha para asegurar.
- Página 9 Air Chuck Tank Valve Place the air chuck on the tank valve and Open the relief valve. Drain all air from the housing and repeat twice to remove all moisture. begin filling until pressure relief valve opens. • Coloque la tirada del aire en la válvula del tanque y comience •...
- Página 11 www.videolarm.com S - V I E W PA N / T I LT Analog & IP Installation and Operation Supplement: B e fo r e a t t e m p t i n g t o c o n n e c t o r o p e r a t e t h i s p r o d u c t , 81-IN5409 p l e a s e r e a d t h e s e i n s t r u c t i o n s c o m p l e t e l y.
- Página 12 Electrical Specifications Content of Box S-VIEW PAN/ TILT Class 2 Power Supply Only MODELS: 24 VAC S-view: Analog 13 WATTS S-view: IP 28 WATTS MODELS: 12VDC English S-view: Analog 13 WATTS S-view: IP 20 WATTS Fuente De Alimentación De la Clase 2 Solamente. MODELOS: 24 VAC S-vista: Análogo 13 VATIOS...
- Página 13 CAPTIVE SCREW Remove Pan/Tilt from shipping carton. To secure in place, tighten captive screw. Install in base bracket in housing. • Para asegurar en lugar, apriete el tornillo prisionero. • Quite Pan/Tilt del cartón del envío. Instale en soporte bajo en la cubierta. •...
- Página 14 (Analog) PROTOCOLS VL422 PELCO P 4800/9600 PELCO D 4800/9600 To set the address at “0” side the all switches off The S-View Pan/Tilt support the above protocols. as shown. See table in back for address 0-255 This is done automatically no settings are required.
- Página 15 (IP) (IP) Select Pan/Tilt PreSets functions (also used to scroll camera menu) Lens Functions Use to save or remove PreSets IP INSTRUCTIONS: The factory default IP Control interface for IP PTZ control. address is : 192.168.0.200. • Controle el interfaz para el control del IP PTZ. •...
- Página 16 DISPLAY / MENU DISPLAY / COMPASS Use this submenu to activate compass heading. Press zoom in to turn on, zoom out to turn off, Pan Left to exit. Use Up & Down control on the controller to navigate through the menu. Pan left and right are •...
- Página 17 DISPLAY / ADDRESS DISPLAY / TEMP. When activated this will display camera’s Will display temperature data from Pan/Tilt on address on the monitor. monitor. • Cuando está activado esto exhibirá la dirección de la • Exhibirá datos de la temperatura de Pan/Tilt en cámara fotográfica en el monitor.
- Página 18 CAMERA / STABILIZATION ALARM / MENU Camera sub menu includes, image stabilization, day/night mode, shutter, Use sub menu to activate alarm. When backlight, AGC and digital zoom. Image enabled camera will go to preset “1” when stabilization is not a feature of all cameras. alarm input is closed.
-
Página 19: System Info
ZONE / LLIMIT ZONE / TITLE Llimit will “turn off” menu and allow you to Shows on menu screen title characters position camera for left limit of zone. selected. • Voluntad de Llimit "dar vuelta apagado" al menú y permitir que •... - Página 20 PRESETS PRESETS Allows user to set dwell time for each existing stored Allow user to set dwell time for each stored preset. If preset. The above screen show (6) stored presets, with presets have not been saved the dwell time for that dwell times of, 9,5,12,5,5,5 seconds.
-
Página 21: Other Features
1, 2, 3... To set a manually controlled pattern by Using the joystick move Pan/Tilt to desired joystick set Preset 80 (80,#, positions where you can record up to 128 seconds of movement. • Para fijar un patrón manualmente controlado por el sistema •... - Página 22 Table 1: Pan/Tilt Address Dip Switch Settings ADDRESS ADDRESS ADDRESS...
- Página 23 ADDRESS ADDRESS ADDRESS ADDRESS...
- Página 24 ADDRESS ADDRESS ADDRESS ADDRESS...
-
Página 25: Replacement Parts List
Replacement Parts List Part No. Description RP6039mm1.8 Motor (2) RPVL2314 Hub Bracket RP40CASL385 Slip Ring Assembly (2) RPVL2315 20T 80 Pitch Pulley (2) RP605007 Bearing RPVL2316 90T Pan Pulley RPVL2318 60T Tilt Pulley RPVL2320 Tilt Bearing Hub RP605011 Bearing RP73CAVKS454 23 X Zoom Camera RP92WSFN11 Nylon Washer (2) -
Página 26: Product Registration/Warranty
Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second-to-none in the security industry. Should a problem arise, rest assure that Videolarm stands behind its products by offering some of the most impressive warranty plans available: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on all camera systems (SView, QView, Warriors), and InfraRed Illuminators.