Troubleshooting; Fault Table - Siemens HB86P.72 Manual De Instrucciones

Troubleshooting

Fault table

Problem
The appliance does not work.
Set clock" appears in the status
bar. The time displayed is not the
right time.
Select language" is shown in the
right hand settings area.
7. Tighten the screws until hand tight using a slotted
screwdriver (blade width 8 11 mm), then close the
door. (Fig. G)
G
The oven may only be used again when the
panels are correctly installed.
Malfunctions often have simple explanations. Please
refer to the table before calling our after sales service.
It might be possible for you to rectify the problem
yourself.
If a dish does not turn out as expected, refer to the
section entitled Tested for you in our cooking studio,
You will find many cooking tips and tricks there.
Possible cause
Faulty circuit breaker. Look in the fuse box and check that the
Power cut.
Remedial action/notes
circuit breaker is in working order.
Set the right time using the rotary
selector and press the 0 button.
The set language does not change after
a power cut.
65