GreenWorks GPW 1951 Manual Del Operador página 18

USING THE SPRAY TIPS
Each of the spray tips has a different spray pattern. Before starting any cleaning job, determine the best
spray tip for the job. The following chart offers some general guidelines to help you choose the best
spray tip for your application.
NOTE: Always try spray tip in an inconspicuous area first.
■ Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
■ Engage the lock-out on the trigger handle by pushing the trigger lock button to the right.
■ Pull out the desired spray tip from the tip storage on the handle.
■ Pull back the quick-connect collar on the spray wand.
■ Push the spray tip into place in the spray wand.
■ Push the collar forward so that the spray tip is secured properly. Check to see that the spray tip is
secure.
Spray Tip
1
Spray Wand
SPRAY TIP
Green - Narrow fan tip (25° )
■ The green pressure washer tip provides high versatility with its 25 degree angle
25
O
White - Wide fan tip (40° )
■ The white 40 degree tip, referred to as the "fan" tip creates the widest area of
40
O
Black - Soap spray tip
■ The black soap spray tip, is used for soap application. Soap is applied under low
SOAP
Turbo Nozzle Tip
■ The nozzle rotates in a zero to 15 degree spray pattern in a circular motion to
(See Figure 10.)
2
3
Fig. 10
tip. Referred to as the washing tip, because it provides adequate pressure to
remove dirt from surfaces, but is designed to not damage many surfaces. This
pressure washer tip is designed for "sweeping" foliage or debris given its wide
angle. This tip is versatile due to its wide area of cleaning and strong pressure
application.
cleaning with relatively low pressure. This pressure washer tip is best used for
light or delicate cleaning applications. It is recommended for light cleaning on
wood decks and other soft or delicate surfaces.
pressure high volume for optimum performance. Soap cannot be applied under
high pressure with this machine.
break down tough dirt and grime. The spray pattern can cover area of 4 to 8
inches wide, depending on a distance between the tip and the surface being
cleaned.
OPERATION
1-Pull back the quick-connect collar
2-Push the spray tip into place
3-Push the collar forward
APPLICATION
EN - 18