Operation Methods - FAR CLIM2011 CI Manual De Instrucciones

Cooling mode
• After machine turns on, default value is cooling mode with 22°C and low fan speed.
• Press "MODE" to select cooling mode, cooling mode indictor turns on.
• Press "UP" or "DOWN" to adjust temperature ( from 16°C to 31°C).
• Press "FAN" to select high or low fan speed.
Fan mode
• Press "MODE" to select fan mode, fan mode indicator turns on.
• Press "FAN" to select fan speed, press "UP" or "DOWN" to select high speed or low
speed.
• Temperature and sleeping function cannot be setup.
Timer mode
• Under standby mode, press "TIMER" to set up the power-on time, press "TIMER" to
adjust the timer (from 1 to 24). Timer indicator turns on.
• Under power-on mode, press "TIMER" to set up power-off timer. Press "TIMER" to
adjust the timer (from 1 to 24). Timer indicator turns on.
Dehumidifying mode
• Press "MODE" to select dehumidifying mode, dehumidifying mode indicator turns on.
• Under dehumidifying mode, timer and sleeping function cannot be setup, and fan speed
is low.
Sleeping mode
• Press key "SLEEP" to enter into sleeping mode, default value of fan speed is low.
• When sleeping mode turns on, under cooling mode, one hour later, temperature will go
up 1°C from setting temperature, and then keep the same; under heating mode, one hour
later, temperature will go down 1°C from setting temperature, and then keep the same.
• Sleeping mode is invalid under dehumidifying and fan mode. Under water full, machine
standby and mode conversion, sleeping mode will be cancelled.
Compressor protection
• Three minutes later after power on / restart, compressor starts to run.

Operation Methods

GB-12