OPERATinG inSTRUCTiOnS
sTARTING THE sNOw sHOVEL (See Figures 6-7)
in order to avoid serious injury, the operator and unit must be in a stable position when starting
the snow shovel.
follow this sequence exactly in order to start the snow shovel.
• Verify that the battery pack is inserted into the battery compartment.
• Press and hold the lock-out button (fig. 6).
• While holding the lock-out button, press and hold the trigger switch.
NOTE: The Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted. Once
trigger is depressed and unit is started, release the lock-out button.
• Hold the handles and begin to use the snow shovel (fig.7).
sTOPPING THE sNOw sHOVEL
• Release the trigger switch.
• The lock-out button will pop out, and the snow shovel will stop.
Lock-Out
Button
Trigger
Fig. 6
13
Fig. 7