Symbols - POWER SMITH PCS140H Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
Volts
A
Amperes
hz
herz
W
Watts
/min.
Per Minute
Alternating Current
Direct Current
Read the Operator's Manual
Wear Eye and Ear Protection
Safety Alert
Wet Conditions Alert
Operate With Two hands
kickback
Bar Nose Contact
One handed
Wear Gloves
Wear Safety Footwear
keep Tool Away from Electrical Lines/
keep Bystanders Away
English

SYMBOLS

NAME
Voltage
Current
Frequency (cycles per second)
Power
Revolutions, strokes, surface speed, orbits etc., per minute
Type of current
Type of characteristic of current
To reduce the risk of injury, the user must read and under-
stand operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 along with hearing protection when
operating this equipment.
Precautions that concern your safety.
Do not expose to rain or use in damp locations.
hold and operate the saw properly with both hands
DANGER! BEWARE OF kICkBACk.
Avoid bar nose contact
Do not operate the saw using only one hand.
Wear non-slip, heavy-duty protective gloves when handling
the chain saw
Wear non-slip safety footwear when using this equipment.
DANGER! Risk of electrocution! keep tool 50 feet away from
electrical lines. keep all bystanders at least 50 ft. away or
twice the height of the largest trees in the felling area when
felling.
10
EXPLANATION