jbc DM 6700 Manual De Instrucciones página 11

DR 5650 DESOLDERING IRON
DM 6700 station allows you to
connect the DR 5650 desoldering iron
Ref. 5650000 by adding the MS 9004
electric desoldering pump Ref.
9004000 or the MS 9005 air pressure
desoldering system Ref. 9005000.
For the desoldering iron to work
properly, the following components
are required: the control unit, the
desoldering iron, a desoldering pump
module and the DR 8500 stand.
These articles are not included with
the station.
desoldering iron stand
Ref.0788500
DR 5650
desoldering iron
Ref.5650000
Heating element
Ref.5650010
Spare filters
Ref.0966689
Desoldering air filter
DR 8500
Desoldering pump
connector
Tool connectors
Electric desoldering pump
MS 9004 Ref.9004000
Air pressure desoldering system
MS 9005 Ref.9005000
The desoldering iron is connected to the
station following the below procedure:
Connect the cable connection from the
desoldering iron to the plug in the DR 8500
desoldering iron stand, connect the
vacuum hose to the desoldering air filter of
the desoldering pump module.
The cable connection of the desoldering
iron stand can be connected to any of the
four connectors at the back of the station
and the cable connection of the
desoldering pump is connected to the plug
"Desoldering pump".
9
ENGLISH