2. Adjust the cradle angle, and tighten the long mounting knob
until the cradle
3. Rotate the swivel mount bracket
The bracket clicks as you turn it. Select a good viewing angle,
and then tighten both knobs.
Connecting Power to the Mount
If any wire is left unconnected, insulate the wire and safely secure it on your boat.
1. Connect the red
(10 to 50 Volts).
2. If necessary, connect the serial data wires to your boat.
• Yellow
➌
• Blue
is the serial data output wire.
➍
• Green
➎
3. If necessary, connect the stereo jack
Montana 600 Series Marine Mount Instructions
is snug.
➌
and black
➊
is the serial data input wire.
is the serial ground wire.
by twisting it left or right.
➍
notice
wires to your boat's main power
➋
.
➏
➍
➏
➊
➋
➌
➍
➎
➌
5