Using Your Goal Zero Yeti; How To Use; Best-Use Strategy; Cold Weather Usage - Goalzero yeti200x Guia Del Usuario

Using your Goal Zero Yeti

How to use your Goal Zero Yeti:
1. Press the power button located above each port you will be using. **When not using
certain ports, make sure to turn them off to conserve power.
2. You'll know the port is turned on when the LED light on the button is illuminated.
3. Plug in your gear for power anywhere life takes you.
4. If possible, keep your Goal Zero Yeti plugged into a power source when not in use.
5. You can charge your Goal Zero Yeti, and run your gear at the same time.

Best-Use Strategy:

When recharging gear with your Yeti, take note of the LED Battery Display. If you plug in devices
that have a high power requirement, the charge level of your Yeti can drop very quickly and you
may not get exactly 187Wh of power. On the flipside, if you're charging devices that draw power
more slowly (a tablet), you will get closer to 187Wh from your Yeti. Also, especially when using
the AC power output, the Goal Zero Yeti will be converting the energy from the DC power of
the battery to the AC power needed by your device. Although your Goal Zero Yeti has a highly
efficient inverter, there is still some energy lost in the conversion and you will not get the full
rated capacity of the battery. If you're experiencing shorter runtimes, you may want to check the
device's power requirements, see Troubleshooting for help.

Cold Weather Usage:

Cold temperatures (below freezing) can impact the Goal Zero Yeti's battery capacity. If
you'll be out living off-grid in sub-zero conditions, we recommend keeping your Goal Zero
Yeti in an insulated cooler, connected to a power source (solar panels), and charging your
gear. The natural heat generated by the Goal Zero Yeti contained in an insulated cooler
will keep battery capacity at its highest.
6