Cleaning, Storage And Disposal; Troubleshooting - 3M Versaflo TR-659 Instrucciones De Uso

CLEANING, STORAGE AND DISPOSAL

The 3M™ Battery Adapter TR-659 and associated components should be cleaned and inspected after each use and prior to storage.
Cleaning
Follow the hygiene practices established by your employer for cleaning the specific contaminants to which the system has been exposed.
3M™ Adapter TR-659
The adapter may be wiped down with a mild cleaning or disinfecting solution taking care to avoid the battery connection pins and power cord connection
contacts. Clean battery connection pins and power cord connection area with a clean dry cloth. Do not immerse the TR-659 battery adapter.
3M™ Heavy Duty Holster TR-656
The heavy duty holster may be gently scrubbed with a soft bristle brush or wiped down with a damp cloth.
3M™ Easy Clean Holster TR-657
The easy clean holster can be wiped down with a mild cleaning or disinfecting solution. Perform water wipe down after disinfection.
Storage
Relative humidity: < 85%
Temperature (daily storage): -22°F to 122°F (-30°C to 50°C)
Disposal
The battery adapter contains electronic components. Dispose of according to local and government regulations.
Dispose of holsters in accordance with local and government regulations for the contaminant to which they have been exposed

TROUBLESHOOTING

There are no user serviceable parts inside the TR-659 battery adapter.
Problem
Indicator light on battery adapter continously
blinks after battery/adapter combination is
powered on
Indicator light on battery adapter does not
turn on after battery/adapter combination is
powered on
Indicator light on battery adapter turns on after
power button is pressed but the motor/blower
does not turn on
Please refer to the User Instructions for the TR-630 battery pack and chargers- chargers and battery packs for the 3M™ Powered Air Purifying
Respirator Assemblies TR-600 Series and to 3M Technical Data Bulletin #223 (Battery Maintenance for 3M™ Versaflo™ Respirator Systems) at
www.3m.com/workersafety for troubleshooting assistance for these components.
Probable Cause
Low battery
Battery adapter connection error
Low battery
Battery adapter connection error
Faulty power switch
Faulty power cord
Faulty motor/blower
8
(English)
Corrective Action
Ensure that battery is fully charged
Inspect battery connection pads on TR-630
battery and battery connection pins on TR-659
adapter for signs of wear, corrosion, stuck pins
or any other damage and replace battery or
adapter if needed
Ensure that battery is fully charged
Inspect battery connection pads on TR-630
battery and battery connection pins on TR-659
adapter for signs of wear, corrosion, stuck pins
or any other damage and replace battery or
adapter if needed
Verify that there is not a connection error
between the battery and adapter and that the
power cord connections are secure. Inspect
power switch for signs of wear or damage.
Replace battery adapter if needed
Inspect power cord and power cord
connection(s) for signs of damage and wear.
Ensure power cord connection(s) are secure.
Replace power cord if needed
If the power cord is not damaged and power
cord connections are secure, inspect the
motor/blower for signs of damage and wear.
Replace motor/blower if needed