Intended Use; Environmental Protection - Worx WX252 Manual Original

OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.

INTENDED USE

The power tool is intended for driving in and loosening
screws as well as for drilling in wood, metal and plastic.
ACTION
Before operation
Charging the Battery
NOTE:
1. Maximize Battery Performance Prior to
initial use, the battery must be charged 5
hours to fully utilize the battery capacity.
12
2. When the battery is full charged, the
light turns green.
Assembly and adjustment
Selecting the Proper Bit
Inserting and Removing bits
Forward/reverse/lock
WARNING: Never change the
direction of rotation when the
chuck is rotating, wait until it is stopped!
Adjust the Extended Shaft Position
Operation
Operating the On/Off Switch
WARNING: Do not operate for
long periods at low speed because
excess heat will be produced internally.
LED Light Indicator
MAINTENANCE
FIGURE
Your power tool requires no additional lubrication or
maintenance. There is no user serviceable parts in your
power tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of
See Fig. A
dust. If you see some sparks flashing in the ventilation
slots, this is normal and will not damage your power tool.

ENVIRONMENTAL PROTECTION

This product has been marked with a symbol
See Fig. B
relating to removing electric and electronic
waste. This means that this product shall not be
See Fig. C
discarded with household waste but that it shall be
returned to a collection system which conforms to the
See Fig. D1,
European Directive 2012/19/EU. It will then be recycled
D2, D3
or dismantled in order to reduce the impact on the
environment. Electric and electronic equipment can be
hazardous for the environment and for human health
See Fig. E, F
since they contain hazardous substances.
See Fig. G
See Fig. G